The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube, 13CrMo44 density tube.

13CrMo44 density and so on steel structure engineering steel has good plasticity, which can make the structure have obvious deformation before being destroyed, so as to avoid brittle failure of structure. The good plasticity of steel can adjust the local peak stress to redistribute the stress, and improve the ductility of components, so as to improve the seismic capacity of the structure. The impact toughness of 13CrMo44 density and so on steel structure engineering steel is good, which can improve the ability of resisting dynamic load and avoid the occurrence of cracks and brittle fracture.

Plate products 13CrMo44 density order online: 14*2150*9300, 14*2400*10000, 14*2400*9900, 16*2100*10650, 16*2150*10000, 16*2150*10250, 16*2150*10350, 16*2150*10400, 16*2150*10450, 16*2150*10750, 16*2150*10950, 20*1950*9000, 20*1950*9150, 20*1950*9350, 20*1950*9550, 20*1950*9700, 20*1950*9750, 20*2100*10700, 20*2100*10750, 20*2100*10800, 20*2100*11600.

The deoxidization process of Q345R boiler vessel plate if the type and amount of deoxidizer are controlled to make a certain amount of oxygen remain in the 13CrMo44 density steel, when sufficient amount of strong oxidant is added to make the steel deoxidize well, the co bubble will escape during the solidification process and generate boiling phenomenon, no co bubble will be generated during the solidification of the 13CrMo44 density steel, the steel used for the pressure vessel of the killed steel is called the killed steel, this kind of steel is called the boiling steel.